Fluidmaster Pro 45 Fill Valve Installation Instructions

2020. 2. 29. 11:23카테고리 없음

PerforMAX High Performance Toilet Fill Valve. Quietest and most powerful toilet fill valve on the market. Works with all toilets, including Kohler®, Toto® and American Standard®. Maximize toilet performance and save water.7 Year WarrantyUniversal fit, perfect for: High Efficiency Toilets HET 1.28 gal, Dual Flush, including DUO FLUSH®, 1.6 gallon toilets with 2' and 3' flush valves (1994 and newer), Older high gallon toilets with 2' flush valve (1994 and older)2X greater refill rate than standard fill valvesAvoids excessive or inadequate bowl fill levelQuick, easy installation.

Fill

The fill valve, also known as a ballcock or refill valve, is a very important component in your toilet since it fills the tank of the toilet after every flush. A malfunctioning fill valve can cause a bit of frustration for those who do not know how to fix or replace them. It can also increase your water bill if your toilet is running endlessly due to a bad fill valve. If your fill valve is no longer working or if you just want to update the components in your toilet, then you've come to the right place.

In this article we will show you how to install a fill valve.For the purposes of illustrating how to install a new fill valve, the following instructions are specifically for a. However, since many other fill valves will use the same basic instructions with slight variances, these instructions can be applied to many other types of fill valves.

Always read the instructions that come with the valve you purchased, as there are some very important, but not so obvious adjustments that need to be made. The Fluidmaster 400A is a universal fill valve that will work wonderfully in a wide array of one and two-piece toilet models.If you would like to purchase the Fluidmaster 400A. Step 1: Shut off the to the tank by turning the supply knob to the off position. The water supply is located behind the toilet, coming through either the wall or the floor. If you do not have a shut off, turn off the main water supply for the home.Place a few towels around the back and sides of the toilet.

With the water turned off, you will begin to empty the tank. Carefully remove the and set it aside. The tank water can be conserved by using a small cup to empty it into a bucket. The water can then be used to water a plant, for example. Or, you can simply hold the down to flush as much of the water out of the tank as possible. Use a sponge or a few rags to soak up the rest of the water in the tank.Disconnect the refill tube from the flush valve. Use a pair of channel-lock pliers to loosen the nut connecting the water supply line to the toilet, which is located on the underside of the tank.

Fluidmaster Pro45 Fill Valve

ValveFluidmaster Pro 45 Fill Valve Installation Instructions

Fluidmaster 400 Fill Valve Troubleshooting

There will be a small amount of water in the when you remove it. Then remove the jam-nut that holds the fill valve in the tank. Next, remove the old fill valve assembly from the tank. Step 11: Attach one end of the black refill tube to angle adapter and the other end to the nipple located near the top of the valve.NOTE: Flow from the refill tube must be positioned just above the overflow pipe.

Do not insert the refill tube down into the overflow pipe below the water level. This will cause water to siphon out of the tank, down the overflow pipe, causing the valve to turn on and off as it tries to keep the tank full. The air gap provided by the use of the angle adapter prevents this.